Power control cable with galvanised steel wire braiding. Suitable for fixed installation or flexible applications. Used as measuring, checking and control cable in machine tool manufacturing, plant engineering and on assembly lines and product lines. For unrestricted mobility without forced movement control and without exposure to tensile load. Used as energy or connecting cable in dry and moist rooms to meet safety requirements. Due to the galvanised steel wire braiding, these cables can even be used under adverse operating conditions or when exposed to high mechanical strain.
- Fine strands of bare copper wire
- Stranding acc. to VDE 0295 class 5
- PVC core insulation black with continuous white figure imprint
- Earth conductor green / yellow in the outer layer
- PVC inner sheath
- Overall screen made of tinned steel wire braid
- PVC outer sheath transparent
- Bending radius 20 x
Temperature range flexible : - 5o C to + 70o C
Static : - 40o C to + 70o C
IP68 16mm Cable Application 4 - 8
Pack of 100 IP68 Nylon Cable Gland complete with locknut in a range of colours:
Cable size : 4 - 8
- Single core PVC insulated TRI-RATED cable specifically designed for use in switch control, relay and instrumentation panels and for motor starters and controllers.
- Plain annealed copper conductors with heat resisting PVC insulation rated up to +105!!
Size AWG : 22
Max Amps : 11.5
Prysmian FP200 Gold Three Core 1.5mm2 100 mtr reel White / Red
The Prysmian FP200 Gold (formerly Pirelli FP200) is a highly durable and addressable, simple to terminate and install fire resistant cable. Approved for fire detection and fire alarm critical signal paths in BS5839-1:2002 'standard' application areas, voice alarm systems to BS5839-8:1998 (and 2006) and emergency lighting systems to BS5266-1:2005.
Colours : Choice of white or red
Overall Diameter : 8.4
Conductor resistance at 20oC ohms / km : 12.1
Current rating DC or single phase AC Enclosed Amps : 16.5
Volt drop DC or single phase AC mV / A / m : 29
Number coded control cable to BS6004 which is used as measuring, checking and control cable in machine tool manufacturing, plant engineering and on assembly lines and production lines to meet stringent safety requirements.
CSE Cables Ltd | Flexible Control Cable | SY Cable | SY Cable 3 Core | SY Cable - 3 Core 1.5mm2
CSE Cables Ltd | Flexible Control Cable | SY Cable | SY Cable 3 Core | SY Cable - 3 Core 1.5mm2
