CAN BUS Cable - Dynamic Applications
CAN (Controller Area Network) is a single serial bus system in which all network devices are equal, or peer to each other. CAN does not address the device, it addresses the message used by the device to decide whether or not the data is required.
The features of CAN bus are a high data transfer speed of 10Kbps to 1 Mbps. As a field bus the CAN bus is used for networking complex controllers such as in the Automotive Industry, Industrial Control Systems, Programmable control systems, handling devices, robotics, building control systems, etc. CAN is internationally standardised according to ISO 11898.
Interconnecting fieldbus cable for dynamic applications.
| Conductor | Extraflexible |
|
| Insulation | Polyolefine | |
| Colour Code | DIN 47100 | |
| Shield | Tinned copper braid coverage ≥85% | |
| Jacket | Polyurethane Colour : Violet RAL 4001 |
|
| Service Temperature | Rating : -30 +80oC Storage : -40 +80oC |
|
| Impedance | 120 Ω | |
| Capacitance | ≤60 nF/km | |
| Minimum Bending Radius | 10 x Diam | |
| Typical Speed | 180 m/min | |
| Max acceleration | 7 m/s2 | |
| Attenuation (pair) | ||
| 1MHz | 1.3 db/100m | |
| 5MHz | 3.1 db/100m | |
| 10MHz | 4.3 db/100m | |
| 20 MHz | 6.4 db/100m |
Ordering Information
| Formation | Code | Nominal Diameter mm |
CU KG / KM |
| 1 x 2 x 0.22 sk | 13DRX 24P 01P | 6.4 | 17 |
| 2 x 2 x 0.22 sk | 13DRX 24P 02P | 8.4 | 41 |
| 1 x 2 x 0.34 sk | 13DRX 22P 01P | 6.8 | 33 |
| 2 x 2 0.34 sk | 13DRX 22P 02P | 9.6 | 52 |
| 1 x 2 x 0.5 sk | 13DRX 21P 01P | 8 | 42 |
| 2 x 2 x 0.5 sk | 13DRX 21P 02P | 10.8 | 60 |
UL Listed