CAN BUS Cable Static Applications

CAN (Controller Area Network) is a single serial bus system in which all network devices are equal, or peer to each other. CAN does not address the device, it addresses the message used by the device to decide whether or not the data is required.

The features of CAN bus are a high data transfer speed of 10Kbps to 1 Mbps. As a field bus the CAN bus is used for networking complex controllers such as in the Automotive Industry, Industrial Control Systems, Programmable control systems, handling devices, robotics, building control systems, etc. CAN is internationally standardised according to ISO 11898.    

Interconnecting fieldbus cable for static applications.

Conductor Flexible

UL Approval

CSA Approval
Insulation Polyolefine
Colour Code DIN 47100
Shield Tinned copper braid coverage ≥85%
Jacket Special Compound
OFS type colour : violet RAL 4001
Service Temperature Rating : -5 +80oC
Storage : -40 +80oC
Impedance 120 Ω
Capacitance ≤60 nF/km
Attenuation (pair)  
1MHz 1.3 db/100m
5MHz 3.1 db/100m
10MHz 4.3 db/100m
20 MHz 6.4 db/100m

Ordering Information

Formation Code Nominal Diameter
mm		 CU KG / KM
1 x 2 x 0.22 sk 13DRX 24P 01R 5.7 17
2 x 2 x 0.22 sk 13DRX 24P 02R 7.6 35
1 x 2 x 0.34 sk 13DRX 22P 01R 6.8 22
2 x 2 0.34 sk 13DRX 22P 02R 8.5 47
1 x 2 x 0.5 sk 13DRX 21P 01R 7.5 42
2 x 2 x 0.5 sk 13DRX 21P 02R 9.7 60

UL Listed